Aida fabric size calculator

Divide the stitch count by the fabric count to get the design size in inches, then add a margin on every side. DMC advises at least 3 inches (8 cm) all round for framing. A 100 × 100-stitch design on 14-count Aida is 7.1 × 7.1 inches, so cut 13.1 × 13.1 inches of fabric. On evenweave or linen stitched over two threads, divide by half the count (28-count over two works like 14-count).

Fabric size calculator

Cut your fabric 13.1 × 13.1 in (33.4 × 33.4 cm) The stitched design is 7.1 × 7.1 in (18.1 × 18.1 cm): 100 ÷ 14 = 7.1 in across, plus 3 in on every side.
The same design on other fabrics
FabricDesign sizeFabric to cut
11-count9.1 × 9.1 in15.1 × 15.1 in
14-count7.1 × 7.1 in13.1 × 13.1 in
16-count6.3 × 6.3 in12.3 × 12.3 in
18-count5.6 × 5.6 in11.6 × 11.6 in
22-count4.5 × 4.5 in10.5 × 10.5 in
28-count over two7.1 × 7.1 in13.1 × 13.1 in
32-count over two6.3 × 6.3 in12.3 × 12.3 in

Runs in your browser. Nothing is uploaded. No sign-up.

How does the calculator work it out?

Two sums, done for the width and the height:

  1. Design size = stitches ÷ count. DMC defines the count as “the number of stitches you can make in an inch”, so a 140-stitch-wide design on 14-count is 10 inches wide.
  2. Fabric to cut = design size + 2 × margin. DMC’s advice for framing is “a clear border of at least 8cm/3inches all the way around your design”, so the calculator starts at 3 inches a side.

Change any number and the result updates as you type. The table underneath shows the same design on other common fabrics, so you can see the trade-off before you buy.

How big is a design on each count?

The same stitches shrink as the count goes up. Here is the design size, then the fabric to cut with 3-inch margins:

Design (stitches) 11-count 14-count 16-count 18-count
50 × 50 4.5 in → 10.5 in 3.6 in → 9.6 in 3.1 in → 9.1 in 2.8 in → 8.8 in
80 × 100 7.3 × 9.1 in → 13.3 × 15.1 in 5.7 × 7.1 in → 11.7 × 13.1 in 5.0 × 6.3 in → 11.0 × 12.3 in 4.4 × 5.6 in → 10.4 × 11.6 in
100 × 100 9.1 in → 15.1 in 7.1 in → 13.1 in 6.3 in → 12.3 in 5.6 in → 11.6 in
150 × 200 13.6 × 18.2 in → 19.6 × 24.2 in 10.7 × 14.3 in → 16.7 × 20.3 in 9.4 × 12.5 in → 15.4 × 18.5 in 8.3 × 11.1 in → 14.3 × 17.1 in

For metric, DMC gives 14-count as 5.5 stitches per centimeter. The calculator shows every result in inches and centimeters.

What about evenweave and linen “over two”?

Evenweave and linen are counted in threads, not squares, and cross stitch on them is usually worked over two threads each way. A 28-count evenweave stitched over two gives 14 stitches an inch, the same size as 14-count Aida. 32-count over two gives 16. Tick “Stitched over two threads” in the calculator, or pick 25, 28 or 32 from the list and tick it. DMC describes working “over two” as “making a cross stitch over two warp and two weft threads”.

How much margin should I leave?

  • Framing or mounting: DMC’s 3 inches (8 cm) all round. Some framers ask for 4 inches, so check with yours before you cut.
  • Hoop display or ornaments: less is fine. Lord Libidan’s calculator offers 2, 3 or 4 inches, with 1 inch as its suggested minimum.
  • Unsure: cut generously. Spare fabric is cheap compared with a finished piece you can’t frame.

Which count should I choose?

Count Strands of floss (World of Cross Stitching) Good for
11 3 Beginners, children, bold designs; 27% bigger than 14-count
14 2 or 3 The usual choice; DMC recommends it for beginners
16 2 Finer detail, a slightly smaller piece
18 1 or 2 Fine detail, small pieces, photo portraits
28 over two 2 Evenweave or linen; same size as 14-count

Lord Libidan suggests more strands on dark fabric (for example 3 to 4 on 14-count) so the floss covers. More strands use more floss. The skein guide shows how much.

Where do I get the stitch count?

Every pattern lists its size in stitches, usually near the key (how to read a cross stitch chart shows where). If you’re making your own from a photo, the cross stitch pattern maker works it out, then shows the design size and the fabric to cut for your count. Our 80-stitch-wide cat example came out at 80 × 100 stitches: 5.7 × 7.1 inches on 14-count, and 11.7 × 13.1 inches of fabric. For needlepoint canvas, the needlepoint pattern maker does the same with mesh sizes from 10 to 18. Once you know the stitch count of each color, how many skeins of floss do I need turns it into skeins to buy.

Questions people ask

How much fabric do I need for a 100 x 100 cross stitch?

On 14-count Aida, 100 stitches is 7.1 inches, so the design is 7.1 × 7.1 inches. With DMC's 3-inch margin on every side, cut 13.1 × 13.1 inches (33.4 cm). On 18-count the design is 5.6 inches and the fabric 11.6 inches square.

How do I calculate the size of a cross stitch?

Divide the number of stitches by the fabric count. A 140-stitch design on 14-count is 140 ÷ 14 = 10 inches. Do it for the width and the height separately. For evenweave or linen worked over two threads, divide by half the count.

What does 14-count Aida mean?

Fourteen stitches to the inch. DMC defines the count as "the number of stitches you can make in an inch", and gives 14-count as 5.5 stitches per centimeter. It's the count DMC recommends for beginners.

Which is better, 11 or 14 count Aida?

11-count has bigger squares, so it's easier to see and the design comes out 27% larger. 14-count is the most common and gives finer detail. Use the calculator's table to compare the same design on both before you buy.

How much extra fabric should I leave around a cross stitch?

DMC advises "a clear border of at least 8cm/3inches all the way around your design" if you'll mount or frame it, so add 6 inches to each dimension. Some framers ask for 4 inches; small ornaments can manage with less. Change the margin in the calculator.

How many strands of floss should I use on each count?

Common guidance (World of Cross Stitching) is 3 strands on 11-count, 2 or 3 on 14-count, 2 on 16-count and 1 or 2 on 18-count, or 2 strands on 28-count over two. Dark fabrics often need an extra strand to cover.